WAYS TO EXTEND THE LIFESPAN OF YOUR HOME'S HOT WATER SYSTEM THROUGH MAINTENANCEMAKING SURE LONGEVITY OF YOUR HOME'S HOT WATER SYSTEM: MAINTENANCE ADVICEKEY MAINTENANCE TECHNIQUES FOR YOUR HOME'S HOT WATER SYSTEM

Ways to Extend the Lifespan of Your Home's Hot Water System Through MaintenanceMaking Sure Longevity of Your Home's Hot Water System: Maintenance AdviceKey Maintenance Techniques for Your Home's Hot Water System

Ways to Extend the Lifespan of Your Home's Hot Water System Through MaintenanceMaking Sure Longevity of Your Home's Hot Water System: Maintenance AdviceKey Maintenance Techniques for Your Home's Hot Water System

Blog Article

Book Services

On this page underneath you can find a good deal of worthwhile additional info about How to Maintain Your Water Heater & Prolong its Life.


Water Heater Maintenance Tips You Can't Afford to Forget
Warm water is crucial for everyday comfort, whether it's for a rejuvenating shower or washing recipes. To ensure your warm water system runs efficiently and lasts much longer, normal upkeep is crucial. This post supplies sensible suggestions and understandings on just how to keep your home's hot water system to stay clear of disruptions and pricey repairs.

Introduction


Keeping your home's warm water system may appear overwhelming, however with a couple of simple steps, you can ensure it runs smoothly for years to come. This overview covers every little thing from understanding your warm water system to DIY upkeep suggestions and recognizing when to employ professional aid.

Importance of Maintaining Your Warm Water System


Regular maintenance not only prolongs the life-span of your hot water system however likewise guarantees it operates successfully. Overlooking upkeep can lead to lowered efficiency, greater energy bills, and also premature failure of the system.

Indicators Your Hot Water System Demands Upkeep


Recognizing when your warm water system requires focus can protect against significant concerns. Look out for indications such as inconsistent water temperature, strange noises from the heater, or corroded water.

Recognizing Your Hot Water System


Prior to diving right into maintenance jobs, it's handy to understand the fundamental elements of your warm water system. Normally, this consists of the hot water heater itself, pipes, anode rods, and temperature controls.

Regular Monthly Maintenance Tasks


Routine month-to-month checks can aid catch minor concerns prior to they intensify.

Flushing the Water Heater


Flushing your hot water heater removes debris accumulation, boosting performance and prolonging its life.

Checking and Replacing Anode Rods


Anode rods avoid corrosion inside the tank. Evaluating and changing them when broken is vital.

Evaluating and Readjusting Temperature Setups


Readjusting the temperature settings makes certain optimum efficiency and security.

DIY Tips for Maintenance


You can carry out a number of upkeep jobs yourself to keep your warm water system in top condition.

Checking for Leaks


Consistently check pipes and connections for leaks, as these can result in water damage and higher costs.

Testing Pressure Alleviation Valves


Checking the stress safety valve guarantees it operates properly and stops extreme pressure buildup.

Insulating Pipes


Shielding warm water pipelines minimizes heat loss and can conserve power.

When to Call an Expert


While DIY upkeep is advantageous, some issues call for professional knowledge.

Complex Concerns Requiring Specialist Help


Instances consist of significant leakages, electrical problems, or if your water heater is regularly underperforming.

Regular Expert Upkeep Advantages


Specialist upkeep can include comprehensive inspections, tune-ups, and ensuring conformity with safety requirements.

Verdict


Routine upkeep of your home's hot water system is important for efficiency, durability, and price financial savings. By following these pointers and knowing when to seek professional help, you can guarantee a reputable supply of warm water without unexpected disruptions.

Water Heater Maintenance Tips to Extend the Life of Your System


Every homeowner should do their best to properly maintain their hot water heater system. Whether you have a gas hot water tank or an electric hot water heater, even a tankless system, there are some things that can be done on your own without calling upon a professional hot water installer.



These simple maintenance tips will help to ensure the life of your hot water systems so you don't have to worry about being without hot water for any considerable amount of time.


Test the TPR Valve


This safety feature has been installed on every hot water tank since 1985 and will help avoid an explosion of your hot water tank if built-up pressure occurs.



To access and test your TPR valve, locate the small dial that looks like a tire stem or bicycle valve on the hot water tank. Turn the dial to shut off hot water to your home or business, then turn it in the opposite direction until you hear hissing noises from the hot water tank.



The valve should be set at 120psi [pounds per square inch]. If pressure is too high, simply open the hot water tanks faucet slightly to reduce the pressure from the pressure relief valve before testing again.


Check the Anode Rod


The anode rod inside your hot water tank attracts rust and sediment that would otherwise build up inside of your hot water tank and corrode it away. A hot water heater maintenance tip is every 6 months you should check this anode rod to ensure it's not completely deteriorated yet (please note: some newer hot water heaters do not have an anode rod).



To replace this hot water heater maintenance tip, simply unscrew the hot water tank drain valve and the hot water tank will drain out. Remove the hot water heater vent screen with a putty knife or flat-head screwdriver to reach the rod. Unscrew it from its mount, then purchase a new hot water heater maintenance tip anode rod (same size as your hot water tanks original rod) and screw it back on.


Drain the Tank


Draining your hot water tank is probably one of those 'gotta-do' tasks you've been putting off for way too long... Well actually, you should never let your hot water tank run completely dry (unless you want to damage the hot water tank).



If your hot water heater runs out of hot water, simply drain the hot water tank. Turn off your hot water heater's TPR valve (as mentioned before) and open the hot water tanks faucet.


Adjust the Temperature


The hotter your hot water supply is, the more energy it will consume. You can adjust this setting by turning your hot water heaters thermostat up or down accordingly. This simple hot water heater maintenance tip can save you money on monthly utility bills if done correctly! This is great for business owners with employees that leave their hot water run too long at home or folks that like really hot showers!



Use a flathead screwdriver to adjust the temperature. This works for either a gas water heater or electric water heater.


Insulate the Heater


Insulating an older water heater keeps hot water hot for much longer. Insulating hot water heaters is one of the best hot water heater maintenance tips you can follow because it also helps keep your hot water tank water hot while waiting for use (instead of cooling off).



You can insulate hot water heaters by purchasing an insulation shield or simply wrapping the hot water tank in bubble wrap.


Insulate the Pipes


Insulating hot water heaters pipes keeps them from losing heat down to the hot water heater, which saves more energy and prolongs the life of your hot water heater! Simply purchase foam pipe insulation from a hardware store and wrap each pipe with it before connecting it to the hot water tank.


Flush Yearly


Flushing out sediment can help you be hot water heater maintenance tip savvy. Sediment build-up and calcium deposits in hot water tanks is caused by everyday minerals found in tap and well water (hardness) that enters the hot water tank through your hot and cold water supply valve.



A simple annual hot water tank flush will remove this sediment from your hot water heater before it has time to corrode its inner walls.


Replace the Air Intake Filter


The air intake filter of a hot water heater cuts down on energy costs since it allows less air into the unit, therefore making it run more efficiently. This simple hot water heater maintenance tip saves money on hot water heaters hot and cold water pipes by preventing it from taking in hot air that reduces the hot water tanks hot water capacity.


Get a Professional Inspection


For the safety of gas heaters or an electric heater, you should always get a professional hot water heater inspection at least once per year or after any maintenance hot water heater tips that needs to be done. A professional hot water tank inspector will take note and recommend any further action if need be to ensure your water heater's efficiency.


Schedule Water Heater Maintenance From ARS/Rescue Rooter


If you feel like your water heating costs are getting too high, or if your existing water heater doesn't run efficiently anymore, you need a trusted plumbing company to perform water heater maintenance service.



At ARS/Rescue Rooter, our trained plumbers perform basic water heater maintenance on a regular basis, and can help extend the life of your water heater. And if your existing system needs replaced, we have a wide selection of tankless water heater options.

https://www.ars.com/blog/water-heater-maintenance-tips


How to Maintain Your Water Heater & Prolong its Life

Do you really like reading up on How to Maintain a Hot Water Heater in a Few Simple Steps? Try to leave a review further down. We'd be glad to see your opinion about this article. We are looking forward that you visit us again in the future. Liked our content? Please quickly share it. Let somebody else locate it. Thank you for going through it.


Information

Report this page